Laminar air flow and Biological safety systems | Biological Protection Equipment | Air Insulators

The camera coating is made of a special TPU film and is reinforced by inserting ABS posts along each side of the structure.
The zipper system allows the camera to open completely for easy operation.
The camera has 10 built-in gloves on three sides to allow easy access to the patient and 2 utility portals used for infusions and other medical equipment.
The belt system allows the patient to be fixed while in the chamber and in turn the camera is firmly attached to a stretcher or bed.
The isolation chamber is a fully foldable unit that requires minimal storage space and is ready for use in seconds.
The camera can be used with a folding stretcher or stretcher trolley, making it easy to move the patient.

MODELO	BIC-I
Dimensions deployed	1900x680x500 mm
HEPA FILTER	3 FILTROS 99,999 particulate efficiency 0,3 microns
Aeration capacity	67 ( m3/hr) > o = 50 l/min
Sound Level	< 65 dB
Alarms	Visual and audible alarms for insufficient pressure or motor failure
Pressure difference	≥ 15 Pa in two minutes after connetion
Standard accessories	3 HEPA filters, 5 pairs of gloves, battery and charger
Disinfection	Fomaldehyde and neutralized with ammonia or hydrogen peroxide
Optional	Folding stretcher and/or stretcher carriage
Maximum load weight	150 kg
Power supply	DC12 V with adapter
Battery life	Charging time in 6 hours and duration of 3 hours
Size	680 x 880 x 840 mm
Neto Weight	20 kg
Total weight	30 kg

MODEL	DESCRIPTION
425-BIC-I	BIOLOGICAL INSULATOR CHAMBER

Biological Protection Equipment: